Fantastic !. Thanks to all who replied. Problem solved. Thanks again ! ----- Original Message ----- From: "j. d. s." To: Sent: Tuesday, July 22, 2003 1:56 PM Subject: [PIC]:Re: 1 wire master/slave problem > actually i believe this is the interface part you need: > http://pdfserv.maxim-ic.com/arpdf/DS2404S-C01.pdf > > it's basically a dual port RAM; one side faces the uP > and the other side faces the onewire net. the data sheet > indicates that it is designed expressly for the type of > situation you are describing below. > > > > -----Original Message----- > > <> wrote on Tuesday, July 22, 2003 12:59 AM: > > > >> I have a PIC reading 1 wire devices, some on a bus, and some through > >> a receptacle. My problem is I need to get the data in the PIC out > >> through the receptacle. Can the PIC be made a Slave ? (a PIC 16F877). > > -- > http://www.piclist.com hint: The list server can filter out subtopics > (like ads or off topics) for you. See http://www.piclist.com/#topics --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.502 / Virus Database: 300 - Release Date: 18/07/2003 -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics