Hi-
I have done it.  It was a moderately large one, no mods necessary.  I
thought it was realy close to maxing it out.  However, I have seen
larger versins with curved blades that I bet would work well.  I also
got somene to cut some on a sheet metal shear, and that worked well, too.
David

Joe Farr wrote:

>Hi all,
>
>Has anybody tried using an office paper guillotine to cut PCB laminate ?
>
>A real cutter is quite expensive (for the amount of time I would need
>one), but I've seen some paper cutters quite cheap.
>They say they will cut up to 10 sheets - that's about 1mm, the PCB
>laminate I use is only 1.5mm, single sided.
>Once you remove the safety guards, they look a similar design.
>
>Any thoughts....
>
>Thanks.
>
>--
>http://www.piclist.com hint: The list server can filter out subtopics
>(like ads or off topics) for you. See http://www.piclist.com/#topics
>
>
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics