> Need to do some blazing work on an  antenna gounding.

Maybe look for brazing ? The torch must be available locally, it is used a
lot for air conditioner and refrigeration equipment installation.

Does it have to be silver ? If not, the alloy can be obtained with the
torch (the same used for brazing a/c copper plumbing). All brazing alloys
contains smoe silver afaik.

Brazing is defined as a heat based part joining operation that involves
temperatures between 500 and 900 degrees C and does not involve melting of
either part metal (but the alloy partially alloys with the parts). I hope
that this is what you're after. Soldering is defined as above but lower
temperature and the solder does not alloy with the parts. Take these
definitions with a grain of salt, I did not look in the books this time.

Peter

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics