I don;t know exactly what is the problem, but I think you have to
convert it in ASCII and then send it to the LCD. just sum 0x32 to each
number you have and send it to the LCD.

Dinho

ken Tan wrote:

> hi.. i actually new bee here..
>
> Could i get some help in programming for LCD display.. i am doing ADC
> conversion using PIC16F877
>
> i face some problem in :-
>
> 1) after getting the value from analog input, i multiply by the
> voltage and
> resolution of 10 bit, i get the value in binary format in 10 bits.  but i
> dunno how to display it in decimal with the LCD
>
> 2)i am stuck in this programming part, because i write a program to
> convert
> it into decimal in a stupid way then dunno how to display it to the LCD
> display. I actually test each bit and then convert every 4binary bit
> into a
> decimal value after multiplication and division. - So could i ask for
> help
> in finding a right way in doing this?
>
> i am first time program the ic here.. sorry for being too troublesome and
> thanks for the reply
> Best Regards
> Ken
>
> _________________________________________________________________
> Using a handphone prepaid card? Reload your credit online!
> http://www.msn.com.my/reloadredir/default.asp
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics