I tried using picstart....If you select 18F1220 as the target the picstart+
option in the programmer tab is greyed out.

----- Original Message -----
From: "Ishaan Dalal" <izx@XIZX.NET>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Tuesday, July 15, 2003 4:18 PM
Subject: Re: [PIC]: Picstart Plus/18F1320


> I don't see any difference between high-voltage ICSP on the 1320 v/s the
> 252/452 based on the programming specs datasheets. I am going to try
jumping
> wires from the Picstart to a lone 1320 on a breadboard later today -- will
> have to give the configuration bits a good lookthrough though. Will keep
you
> guys posted...
>
> Cheers,
> Ishaan
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu