Aggies? Were they not the first to perform a hemorrhoid transplant? On the serious side of things: If you are interested in the 18F452 kind of chip, check out picbook.com. There is a wealth of free info there and the book is worth the price. There is a link to a hardware source so that you can build or buy in at any level. I am slowly wading through it and thoroughly enjoying it. John Ferrell 6241 Phillippi Rd Julian NC 27283 Phone: (336)685-9606 johnferrell@earthlink.net Dixie Competition Products NSRCA 479 AMA 4190 W8CCW "My Competition is Not My Enemy" ----- Original Message ----- From: "Matt Redmond" To: Sent: Monday, July 14, 2003 1:50 PM Subject: Re: [OT]: Any University of Phx MBA's out there? > You might consider Texas Tech's distance-learning MBA > programs if they offer one fitting your needs. > > http://www.de.ttu.edu/ > > I have considered online degrees but want one from a > 'real' university. With TTU, nobody knows you didn't earn > your degree on campus. I can't shake the feeling that > some online programs will be viewed as substandard by > employers - whether true or not. > > If you don't know, TTU is a large state-funded four-year > school in, um, Texas. In addition, it has a medical > school, law school and a bunch of graduate degree programs > (though only a handful online). The school has a very > good reputation unless you ask an Aggie. > > On another note: I'm completely new to PIC programming. > I have a personal project I want to build - probably with > a 18-series chip - & need to find decent schematic and PCB > design software. Any suggestions? > > > -matt > > -- > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > email listserv@mitvma.mit.edu with SET PICList DIGEST in the body > -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body