It works !!  Thanks Mr. Ken Pergola

----- Original Message -----
From: Ken Pergola <no_spam@LOCALNET.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Monday, July 14, 2003 8:19 AM
Subject: Re: [PIC]: 18F452 Data EEPROM Address


> Hello Biswanath,
>
> Answer to your question is 0xF00000.
>
> You can find this information in the programming specification (DS39576B).
> I'm pretty sure you are right that it is not in the data sheet for the
> PIC18F452 -- I did a search for 'F00000' in Acrobat and found no matches.
>
> Regards,
>
> Ken Pergola
>
>
> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Biswanath Dutta
> Sent: Sunday, July 13, 2003 10:28 PM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: [PIC]: 18F452 Data EEPROM Address
>
>
> I'm  trying to migrate from 16F877 to 18F452
>
> I used to initialize Data EEPROM values in MPLAB as below
>
> ORG  0x2100  --   ;starting addressof the data EEPROM.
> de     H'00', H'AB, ---------
>
> Can't find the starting address for the Data EEPROM in 18F452 in the
> DataSheets.
>
> Can anybody help ?
>
>
> Biswanath Dutta
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body