Hi Ake, at the beginning not. I thought I could test just like an USART. but now I have another CAN Device and the proper termination. and still nothing appear at the scope. thanks Dinho Ake Hedman wrote: > I assume you have another CAN device on the buss and proper termination? > > /Ake > > > Dinho skrev den Sun, 13 Jul 2003 11:27:57 -0300: > >> Hi all, >> >> Does anyone have any experience with CAN bus and 18F248? >> >> I'm trying to implement this protocol, but I got stuck just after I have >> the configuration done. >> >> I'm using CCS C, and I can see, using the watch windows, that after I >> send the configuration comand, it was accept correctly. >> >> then, if I put my module in Loopback mode, I can see everything I send >> out in my receive buffer. >> >> but if I put it in normal mode, I can't see anything at the scope, and >> the transmit error buffer has more than 255 errors, so my module goes to >> buf off mode. >> >> any ideas? >> >> Thanks >> >> Dinho >> >> -- >> http://www.piclist.com hint: The PICList is archived three different >> ways. See http://www.piclist.com/#archives for details. >> >> > > > -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body