> I'm not driving it when the PIC is high, I am driving it when the PIC is
> low.  The PIC is running at 3V.

But that contradicts your earlier statement of having the cathode
connected to 3V.  If the cathode is tied to a 3V rail, then the LED can
only go on when the anode is raised above 3V.


*****************************************************************
Embed Inc, embedded system specialists in Littleton Massachusetts
(978) 742-9014, http://www.embedinc.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu