> >>
> >
> > Whoops.  I forgot to mention the current limiting resistor:
> >
> > +3V --  LED ->  --  40 ohm -- PIC
>=20
> That still won't work, but it will at least prevent damage to=20
> the LED or the PIC.  Since the LED on voltage is probably=20
> around 2V, you may or may not get much current thru it when=20
> trying to turn it on since you are driving it with 2V when=20
> the PIC pin is high.
>=20

I'm not driving it when the PIC is high, I am driving it when the PIC is
low.  The PIC is running at 3V.

Alex

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu