As far as I know, eagle (free version) is limited to 10 x 8 cm (half size of euro card). ----- Original Message ----- From: "Tal" To: Sent: Thursday, July 10, 2003 7:36 PM Subject: Re: [EE]: Autotrax - any good? > Isn't the free eagle also limited to small size PCB's ? (2" by 2" if I > recall correctly). > > Tal > > > -----Original Message----- > > From: pic microcontroller discussion list > > [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Alex Kilpatrick > > Sent: Thursday, July 10, 2003 9:37 AM > > To: PICLIST@MITVMA.MIT.EDU > > Subject: Re: [EE]: Autotrax - any good? > > > > > > Eagle is free for non-commercial use. The only limit (I > > think) is that schematics have to be on one sheet. > > > > I tried Autotrax for a while, and it is pretty limited > > compared to Eagle. > > > > Alex > > > > > -----Original Message----- > > > From: Davd P Harris [mailto:dpharris@TELUS.NET] > > > Sent: Thursday, July 10, 2003 11:29 AM > > > To: PICLIST@MITVMA.MIT.EDU > > > Subject: [EE]: Autotrax - any good? > > > > > > > > > Hi- > > > Can people give me opinions on Autotrax? They have a special > > > on now, until the 14th- Full version for $95 (usualy $495). > > > They also have a Lite version ($45 and 600 hole limit), and a > > > free version (300 hole limit). See: http://www.autotraxeda.com > > > > > > I am not usually nterested in special offers, but this seems > > > to be an awfully good offer -- caviets? David > > > > > > -- > > > http://www.piclist.com hint: To leave the PICList > > mailto:piclist-unsubscribe-request@mitvma.mit.edu > > > > -- > > http://www.piclist.com hint: To leave the PICList > > mailto:piclist-unsubscribe-request@mitvma.mit.edu > > > > -- > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu