If it's a typical aftermarket automotive style gauge, the front bezel is
often removeable by twisting it to align some lugs with cutouts, or on some
simply bending back the retaining tabs.

> -----Original Message-----
> From: John Nall [SMTP:jnall01@ALLTEL.NET]
> Sent: Wednesday, July 09, 2003 3:07 PM
> To:   PICLIST@MITVMA.MIT.EDU
> Subject:      Re: [OT]: Basic theory of a fuel gauge
>
> Thanks for all the advice -- it has been extremely helpful!
>
> A follow up question:  There is a great deal of moisture in the fuel gauge
> -- so much that it is condensed on the inside of the glass, thus making
> the
> gauge difficult to read even if it did work.  I'm not at all sure this
> little puppy comes apart -- anyone have a suggestion on how to get rid of
> the moisture?  Hair dryer?
>
> John
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body


=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================
Any questions about Bookham's E-Mail service should be directed to postmaster@bookham.com.

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body