On Wed, Jul 09, 2003 at 09:44:57AM +1000, Phil wrote:
>
> I'm looking for a do-it-yourself solution for front panel artwork. Perhaps
> something like Press-N-Peel PCB transfer film.

If the panel is metal, try using the PCB transfer stuff, or just inkjet
paper.  With the inkjet + toner you can scrub off the clay layer and
the result looks like a laser print rigth on the metal.  And it's on
there very solidly unless you attack it with acetone.

--
Ben Jackson
<ben@ben.com>
http://www.ben.com/

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.