> I recently ordered and received a set of PCB's from e-Protos.  Not
> hi-tech -- only 10 mils/10 mils, 2-layer, etc, but they did have
> soldermask and silkscreen.  0.62 FR4.

I hadn't heard of these people before, so I checked out their web site.
They specify 7min as the minimum line/space dimensions, which is quite
reasonable for a low cost prototype service.  The basic deal is 5 boards,
5 days, for $95 plus shipping.  I had been using the Advanced Circuits
prototype service which is 3 boards for $100 with the same specs except
that the maximum size is larger.

I'll try these guys out next small 2 layer board.


*****************************************************************
Embed Inc, embedded system specialists in Littleton Massachusetts
(978) 742-9014, http://www.embedinc.com

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads