> Using Jal (or any other programming language) has nothing to do with the
> question. A programmer that can handle a 16F84 can *hardwarewise* handle
> all flash PICs (except that the correct PGM pin must be pulled low, and
> maybe you have a problem with the PICs that need a Vcc-before-Vpp
> sequence!), but the software must support the 16F676. If you use Wisp628
> with it does support the 16F630/676.

        Might I add that you MAY also have to tie the LPV pin, on PICs that have
that feature (the 84 does not). TTYL

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu