> -----Original Message-----
> From: Jeremy Darling [SMTP:jdarling@ASKPIONEER.COM]
> Sent: Monday, June 30, 2003 3:15 PM
> To:   PICLIST@MITVMA.MIT.EDU
> Subject:      Re: [PIC]:PIC Programmer (Newbie)
>
> I didn't ask my question very well.  I was wondering if a programmer for
> the 628 would work on the 676 or if I was going to have to buy or build a
> different programmer.
>
The basic diy programmers are essentialy the same for all the flash type
PIC's, you are unlikely to need any new hardware (apart from a simple
adapter if your programmer does not have the correct socket).  It really
boils down to wether your programming software supports the 676 device.

Mike


=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================
Any questions about Bookham's E-Mail service should be directed to postmaster@bookham.com.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu