>In MPLAB IDE V6.20.0.0 I can define data in assembler which then
>appears in the EEPROM data window. I can read this using the sample
>code in the datasheet PIC18F458. I can also write data using the
>sample code and read it back again. The EEPROM window never shows
>the data I have written.
>I can't find any reference to this anywhere so am I alone in
>having this problem?

I have noticed this with the ICD1 on the 16F877 in MPLAB 5.xx. The EEPROM
window seems to retain the information that is in the hex file and not get
updated.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu