From a local store here in Austin -- Bantam Electronics.  This is the
first time I bought it, so I had no idea what the proper price is.  It
is basically a syringe without a plunger or needle, and only about the
bottom inch or so of the tube has paste in it.

Alex

> -----Original Message-----
> From: Dal Wheeler [mailto:dwheeler@INSIGHTEK.NET]=20
> Sent: Sunday, June 29, 2003 10:05 AM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: Easy-bake SMT Rocks! (pics included)
>=20
>=20
> Where are you gettin $10 tubes of solder paste?
> ----- Original Message -----
> From: "Alex Kilpatrick" <AlexK@HCITRAINING.COM>
>=20
>=20
>=20
> I did my first easy-bake (toaster oven) smt reflow today, and=20
> I have to say that I will *never* go back to hand soldering=20
> if I can avoid it.  My oven was $25 at Fry's, which is=20
> cheaper than most soldering irons. Solder paste was $10 for a=20
> small tube, but I didn't use much.
>=20
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply=20
> us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>=20

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body