Hi Aaron,

Any chance the Tants are installed backwards?  We had very similar
results on a co-workers circuit and that turned out to be the problem.

Dave

A.J. Tufgar wrote:
> I traced it quickly to the power supply part of the circuit, which was
> outputting .9V when it should have been 3.6V.
>
> I took another PCB and soldered on only the power supply components.
>  No luck, although sometimes it gets really hot and outputs 6.6V??  :P
> ...
> The only thing that has changed from this revision to the last are
> widening the VCC and gnd, Using Tantalum instead of electrolytic and

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics