Thanks for the help I took a soldering iron to all the connections out of frustration and wonder of wonders it all works now. Verry odd. Worked with picall not with ic-prog. Either way, all working now ;-> now to find out why my LED's arent flashing propperly then I start block erasing the Dataflash. ----- Original Message ----- From: To: Sent: Thursday, June 26, 2003 4:38 PM Subject: Re: [PIC]: IC-Prog > Hi Jake, > > I think it might be pretty hard to fry a 16F84 in your programmer unless you > didn't have it registered in the 40 pin socket correctly (it should be all the > way down where pin 9 of the 16F84 is inserted into pin 20 of the 40 pin zif). > > In the hardware settings window, select the PROPIC 2 Programmer and then in > the Communication column, invert all of the selections (data out, data in, clk, > mclr, vcc), set your oscillator type and your fuses the way you want in the > main window and see how that works. > > dave. > > > In a message dated 6/25/03 7:02:46 PM Pacific Daylight Time, > grooveee@OPTUSHOME.COM.AU writes: > > > Hi There. > > I have a P16PRO that I am trying to get to work with IC-Prog ... > > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads