I didn't plan to leave them up for very long; just enough so that some of
the users here could have a peek.  I'll move them to a production webserver
soon.  I'm throttled on the upstream so I should'nt be too far out of line.
Hopefully...  :')

I'm using an old Microsim PCboards 8/Specctra and exporting gerbers to
Viewmate gerber manipulator to generate a mirror image and printing on my
old HP 5L.  I've got a tiny bit of aliasing, but so far I haven't seen too
many aspect ratio problems.  I haven't done any large boards with this
method though...  The one posted is about as large as I've done
(2.75"x3.75") with toner transfer.

-Dal
----- Original Message -----
From: "Bob Barr" <bbarr@CALIFORNIA.COM>

> Careful, Dal. Your service provider might not like you using all that
> bandwidth. Many ISPs have prohibitions on serving up web pages and
> such from home.You may want to check your service's Terms of Use
> provisions before you leave your pictures up too long.
>
> It certainly looks like you're making some excellent boards there.
>
> What CAD software/printer combination do you use? I've found that my
> HP6 expands all of the vertical printing by a few percent. It prints
> horizontal stuff at exactly 1:1 scale. I haven't yet found a way
> around that problem.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.