General information: I duplicated the hardware, copied the program and executed the program. It works as it is intended and the waveform looks good. BTW, the code is a good example for calling and returning from an interrupt with a save/restore on the registers. It could stand a little more comments though... John Ferrell 6241 Phillippi Rd Julian NC 27283 Phone: (336)685-9606 johnferrell@earthlink.net Dixie Competition Products NSRCA 479 AMA 4190 W8CCW "My Competition is Not My Enemy" ----- Original Message ----- From: "Joel Middleton" To: Sent: Sunday, June 15, 2003 8:19 PM Subject: Re: [PIC]: Servo Pulse Problem > Thanks everyone for the help, I think I am going to > try and find a real scope that I can use and check > things out. > -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads