On Sun, 15 Jun 2003, Joel Middleton wrote:

> I put a resistor between the PIC and the servo signal
> wire and this does not seem to help. I get the same
> slope on the falling edge whether to servo is
> connected or not. I guess I will order a couple more
> pics and see if that helps.

Let me get this straight - you 'scope the output of the PIC with nothing
connected, and still see the slope on the trailing edge?  Sounds like a
sound card thing to me.  A nickel says it looks far different on a real
'scope.

Dale
--
It's a thankless job, but I've got a lot of Karma to burn off.
Get a PicoKeyer: http://www.hamgadgets.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu