Hi Guys,
        Have a look at AN228.pdf on Mchip's website, all will be explianed!

----- Original Message -----
From: "Brandon Fosdick" <bfoz@TERRANDEV.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Sunday, June 15, 2003 7:43 PM
Subject: Re: [PIC]: Home Automation with PICs


> "Alan B. Pearce" wrote:
> >
> > >>Also CAN is not differential and it does not like
> > >> ground potentials and lots of noise (like running CAN cable parallel
with
> > >> a mains extension cord for 10 meters or so).
> > ><snip>
> > >
> > >Pure crap. It is differential and it handles transients faily well. I
> > >haven't had a single one blow up yet and I've seriously abused them.
> >
> > This sounds like the original poster used CAN processor chips without
the
> > interface driver chips.
>
> That would definately cause problems over long runs.
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu