Herbert,

No problem any more - I got some help from one of the people off-list.

Thanks anyhow, appreciate it.

Regards,
Andre Thomas

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Herbert Graf
Sent: Sunday, June 15, 2003 5:43 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [PIC]: PIC16F877 and 24LC256 EEPROM


> If you dont know, as you so elequintly indicated, how to perform this
> procedure other than with the information that is in the
> datasheet then why
> comment and waste valuable bandwidth?
>
> I _have_ exausted every resource I know about before subjecting my problem
> to a mailing list.

        The problem is you haven't been specific enough. Saying "I have a
problem"
is useless, you need to describe WHAT the problem is. For the record I HAVE
interfaced to that EEPROM in ASM, as have many hear, and the datasheet had
all the info I needed.
        Remember, none of us here have ANY obligation to help you, our time
is our
time, if one of us wishes to donate a small amount of their time to helping
you that's not your right, it's a gift. Sorry for being so harsh but it
doesn't sound like you understand the situation.
        So, with all that being said, what SPECIFIC problem are you having?
TTYL

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu


************************************************************
Scanned by @lantic IS Virus Control Service
This message was scanned for viruses and dangerous content.
@lantic Internet Services (Pty) Ltd. - http://www.lantic.net
eScan for Windows-based PCs - http://www.escan.co.za
************************************************************

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu