On Thu, Jun 12, 2003 at 11:25:33AM -0400, Marc Nicholas wrote:
> I've read everything on the Olimex website, and think that I've got an
> understanding of what they expect and some common pitfalls.

Great, now you only have to overcome the undocumented pitfalls.  ;-)

I went several rounds with them on a board, trying to satisfy their
solder mask requirements in Eagle.  It turns out that their script
(and the requirements!) are a little wacky, but it is possible to
supply .BRD files to them if that's what you want to do.  I did finally
make an acceptable .BRD and get a PO from them, but while waiting for
that last reply (over a weekend) I redesigned the board so I could etch
it myself at home...

Anyway, if someone needs to run SILKWIDTH.ULP, contact me and I can
send you my modified copy and give you some pointers for running it.

--
Ben Jackson
<ben@ben.com>
http://www.ben.com/

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics