Not sure exactly what you're referring to, but perhaps a right-angle head=
er=20
might work for you?  You can get the ones with 2mm (or smaller) spacing. =
 But=20
2mm headers and connectors are expensive, so if you can fit the 0.1" spac=
ing=20
type, it'll be much cheaper.  See here for what I'm referring to ...

      http://rocky.digikey.com/WebLib/Amp/Photos/87232.gif

Cheers,
-Neil.


On Thursday 12 June 2003 10:22, Tal scribbled:
> Hi everybody,
>
> I am looking for a source for low profile PCB to wire connectors. Up to
> 2.5mm in height, one side attached to the PCB (SMD) and the other to
> wires, 6 to 12 contacts, very low current. This kind of connectors are
> used in virtually any notebook computer but I could not find a good
> source for them.
>
> Any help will be greatly appreciated.
>
> Thanks,
>
> Tal
>
> > -----Original Message-----
> > From: pic microcontroller discussion list
> > [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Peter Moreton
> > Sent: Thursday, June 12, 2003 4:15 AM
> > To: PICLIST@MITVMA.MIT.EDU
> > Subject: Re: [PIC]:3rd Overtone- Now: [Pic]: HS/PLL issues
> > when Genlocking to Video sync
> >
> >
> > I have followed this thread with interest as I am using a
> > 9.8Mhz 'Crystal Module' (rectangular metal DIP-14 package) on
> > a PIC18F452. I had assumed that this should be used in HS or
> > HS+PLL mode, (and it works fine when set this way) but it
> > looks from the postings in this thread as though I should be
> > setting the oscillator to EC mode - could someone confirm my
> > understanding, thanks.
> >
> > --
> > http://www.piclist.com hint: The list server can filter out
> > subtopics (like ads or off topics) for you. See
>
> http://www.piclist.com/#topics

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics