Well, technically my panel will be a quarter panel...the board will even by single-sided, so it's only $21 from Olimex plus $8 shipping. AND it includes soldermask and silk screening. -marc On 12/6/03 12:45, "Olin Lathrop" wrote: >> So, I'm just about ready to have my first PCB made for a small sensor >> product that I'll be selling from my personal website. >> >> I've read everything on the Olimex website, and think that I've got an >> understanding of what they expect and some common pitfalls. (My board is >> tiny, so I'm panellizing and have read their comments on that). > > I would get a few prototypes made before doing a whole panel. Advanced > circuits has a good deal where you can get 3 boards up to pretty large > size, 2 layer, rectangular, for $100. Especially since this is your first > board, you should assume something won't be quite what you intended. > After you make the incremental fixes, then you can go get whole panels > made. > > > ***************************************************************** > Embed Inc, embedded system specialists in Littleton Massachusetts > (978) 742-9014, http://www.embedinc.com > > -- > http://www.piclist.com hint: The list server can filter out subtopics > (like ads or off topics) for you. See http://www.piclist.com/#topics > -------------------------------------------------- Marc Nicholas Geekythings Inc. C/416.543.4896 UNIX, Database, Security and Networking Consulting -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics