> So, I'm just about ready to have my first PCB made for a small sensor
> product that I'll be selling from my personal website.
>
> I've read everything on the Olimex website, and think that I've got an
> understanding of what they expect and some common pitfalls. (My board is
> tiny, so I'm panellizing and have read their comments on that).

I would get a few prototypes made before doing a whole panel.  Advanced
circuits has a good deal where you can get 3 boards up to pretty large
size, 2 layer, rectangular, for $100.  Especially since this is your first
board, you should assume something won't be quite what you intended.
After you make the incremental fixes, then you can go get whole panels
made.


*****************************************************************
Embed Inc, embedded system specialists in Littleton Massachusetts
(978) 742-9014, http://www.embedinc.com

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics