Tal,

Take a look at the Molex (www.molex.com) PanelMate Connectors.  They are
low profile (<2mm) and are available in shielded and unshielded
versions.  Up to 30 contacts I believe.

Mike

Tal wrote:
>
> Hi everybody,
>
> I am looking for a source for low profile PCB to wire connectors. Up to
> 2.5mm in height, one side attached to the PCB (SMD) and the other to
> wires, 6 to 12 contacts, very low current. This kind of connectors are
> used in virtually any notebook computer but I could not find a good
> source for them.
>
> Any help will be greatly appreciated.
>
> Thanks,
>
> Tal
>
> > -----Original Message-----
> > From: pic microcontroller discussion list
> > [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Peter Moreton
> > Sent: Thursday, June 12, 2003 4:15 AM
> > To: PICLIST@MITVMA.MIT.EDU
> > Subject: Re: [PIC]:3rd Overtone- Now: [Pic]: HS/PLL issues
> > when Genlocking to Video sync
> >
> >
> > I have followed this thread with interest as I am using a
> > 9.8Mhz 'Crystal Module' (rectangular metal DIP-14 package) on
> > a PIC18F452. I had assumed that this should be used in HS or
> > HS+PLL mode, (and it works fine when set this way) but it
> > looks from the postings in this thread as though I should be
> > setting the oscillator to EC mode - could someone confirm my
> > understanding, thanks.
> >
> > --
> > http://www.piclist.com hint: The list server can filter out
> > subtopics (like ads or off topics) for you. See
> http://www.piclist.com/#topics
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics