Would you repeat that ? KreAture ----- Original Message ----- From: "Nigel Orr" To: Sent: Thursday, June 12, 2003 4:45 PM Subject: Re: [PIC]: 16F628 and interrupt problem... > pic microcontroller discussion list <> wrote on Thursday, June 12, 2003 > 3:47 PM: > > > Finally I found the bug! > > > > Turns out PR2 was in bank1 and I forgot to switch banks before > > adjusting it! Result was PR2 always 255, and I never changed it! No > > wonder my adjustments to mnatch range for duty never took hold. > > And did you have ERRORLEVEL -302 at the top of the code, or just ignore the > warning messages as the assembler tried to tell you about the fault? > BTDTGTTS, but not since I started using the ^0x80 method mentioned on the > piclist occasionally. > > Nigel > -- > Nigel Orr, Design Engineer nigel@axoninstruments.co.uk > Axon Instruments Ltd., Wardes Road,Inverurie,Aberdeenshire,UK,AB51 3TT > Tel:+44 1467 622332 Fax:+44 1467 625235 > http://www.axoninstruments.co.uk > > -- > http://www.piclist.com hint: The list server can filter out subtopics > (like ads or off topics) for you. See http://www.piclist.com/#topics > -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics