At 02:46 AM 6/12/2003 -0500, you wrote:
>That should be 60mA collector current.  Base current should be somewhere
>around 4mA.

Shouldn't be a problem. I wonder if you might have gotten the resistor
value wrong or perhaps a short across the resistor?

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics