I have the Processor Module (POD) PCM16XK0. It handles 876 and below. It
doesn't handle 877. Am I missing something here?

--Bob

At 03:13 PM 6/11/2003 -0700, you wrote:
>Bob,
>
>Why do not you get the transitions socket for 877 since
>You already have the pod?
>
>Andre
>
>
>
>-----Original Message-----
>
>I have one adapter but I did not design this. it can be useful for you
>this
>is exactly
>the same adapter of Microchip official ICD v1.
>----- Original Message -----
>From: "Bob Axtell" <cr_axtell@YAHOO.COM>
>To: <PICLIST@MITVMA.MIT.EDU>
>Sent: Wednesday, June 11, 2003 3:30 PM
>Subject: [PIC]:PIC'876 to PIC'877 Hardware Converter?
>
>
> > I've got a lot of code that needs to be developed for the PIC16F877
>but I
> > only have a ICE2000 uP POD for the '876. I was thinking I'd develop
>the
> > code for all sections except the parallel port on the '876 then switch
>to
> > an ICD for the final run.
> >
> > This would take a small board layout for a 28 DIP receptacle wired
>properly
> > to a 40P plug. Does anybody have one of these so I don't have to lay
>one
> > out? I'' pay a reasonable price.
> >
> > Barring that, I have an brand-new PIC16C745 Emulator POD that I'd be
> > willing to swap for a PIC16F877 Emulator POD. Cost me $545 USD. Its
>the
>one
> > that has the built-in USB slave engine (its a PIC16C73 + USB Engine
>built-in).
> >
> > Any takers?
> >
> > --Bob Axtell
> >
> > --
> > http://www.piclist.com hint: PICList Posts must start with ONE topic:
> > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>--
>http://www.piclist.com hint: PICList Posts must start with ONE topic:
>[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>--
>http://www.piclist.com hint: PICList Posts must start with ONE topic:
>[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

---------------
NOTICE

1. This account can accept email & attachments up to 10M in size.
2. Federal Monitors: At request of client, some attachments are encrypted.
Please DO NOT delay traffic; please reply with credentials for password.
--------------

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads