Hello,
I remember an eForth variant, written to 17C4x. Maybe on www.forth.org?


On Fri, 6 Jun 2003, Barry Gershenfeld wrote:

> At 03:48 PM 6/4/03 -0700, you wrote:
> >Has anyone built a Forth interpreter that runs inside a PIC?  (i.e. not
> >cross complier)
>
> The original FIG-FORTH kernel required about 7k bytes.  It didn't
> matter much which processor was used.  So looking at the average
> PIC I'd say this would not work out.  The 18F-series PIC's might
> be doable.  Though usually by the time I have a look, someone has
> already done it.  At least with flash self-programming it would
> not be impossible.
>
> Barry
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics