Well, typically there is not a serial port on recent PDAs/PPC, but only a SD
or CF expansion slot.  What do you have in mind for the external serial <->
I2C conversion?

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Hugo Harming
Sent: Thursday, June 05, 2003 7:31 AM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [OT]: Interfacing w/ PIC via I2C with Palm/Pocket PC


-----Original Message-----
From: dflagg@EARTHLINK.NET [mailto:dflagg@EARTHLINK.NET]
Sent: Thursday, June 05, 2003 12:59 AM
To: PICLIST@MITVMA.MIT.EDU
Subject: [OT]: Interfacing w/ PIC via I2C with Palm/Pocket PC


I have an application where I would like to interface to a PIC via I2C using
either a Palm Pilot or Pocket PC.  Does anyone know of a Compact Flash or SD
card -> I2C adapter?

Any information regarding this type of project or general PDA/PIC
interfacing would be appreciated.

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body



        I assume you have a serial port on the Palm/PPC, so you could use an
external serial <-> I2C conversion (no need for an expensive CF dongle).

HTH,

Sluggo

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu