I'll second that recommendation. I built up a PC over two years ago with this MB (AMD 1.3GHz, 256 MB DDR, 80 GB 700 RPM) and it is a jewel. Fast and reliable and relatively inexpensive (MB was $62 at Fry's) Chuck ----- Original Message ----- From: "Jason Giglio" To: Sent: Thursday, June 05, 2003 4:45 AM Subject: Re: [PC]: PC mother board recommendation > I highly recomment the SEM K7S5A. It has everything onboard, and is > less than $70. > > The onboard video is not good enough for most 3d gaming of course, but > it has an AGP slot. > > I used to be opposed to "on-board everything", but it's just as cheap as > the boards without the onboard stuff, and you can always stick a card in > if you want to upgrade something. > > On Mon, 2 Jun 2003 10:50:20 -0500 > Dave VanHorn wrote: > > > At 08:13 AM 6/2/2003 -0700, John Pearson wrote: > > >I would like to know what is a good stable, inexpensive ATX mother > > >board that will accept a Duron 900Mhz. > > > > I'm not sure about the Duron part, I'm very happy with my Soyo Dragon > > plus board, running an Athlon 2Ghz processor. > > I've seen the Dragons for <$100 recently. > > > > -- > > http://www.piclist.com hint: The list server can filter out subtopics > > (like ads or off topics) for you. See http://www.piclist.com/#topics > > -- > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu