> -----Original Message-----
> From: Quentin [SMTP:qsc@IPTECH.CO.ZA]
> Sent: Thursday, June 05, 2003 12:53 PM
> To:   PICLIST@MITVMA.MIT.EDU
> Subject:      Re: [PIC]: Home Automation with PICs
>
> Keep in mind, Ruben, that X10 uses zero crossing for timing and
> datalength and the mains AC as carrier. Most X10 were designed for the
> US market which works on 60Hz and X10 will not work on 50Hz.
>
I'm fairly sure X10 works on either?  I've certainly seen some modifications
for using US modules on 240v in the UK and all the mods related to the
voltage change.

Mike


=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================
Any questions about Bookham's E-Mail service should be directed to postmaster@bookham.com.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu