I have a problem using C18 compiler for  PIC18F252.
Do you have any C source code to get a string from USART?
I=B4ve tried to use the GetsUSART function, but I didn=B4t have sucess.

Thank for attention.



----- Original Message -----
From: "Wouter van Ooijen" <wouter@VOTI.NL>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Wednesday, June 04, 2003 2:05 PM
Subject: Re: [PIC]: How to find IR codes?


> > Do you know what the required sample rate would need to be?
>
> depends on the protocol
>
> > And could you explain a little more what you mean about the
> > RC5 'toggle bit' needing special treatment.
>
> read any web page about RC5, for instance
>
> http://www.xs4all.nl/~sbp/knowledge/ir/rc5.htm (but LSB/MSB is wrong)
> http://users.pandora.be/nenya/electronics/rc5/
>
> Wouter van Ooijen
>
> -- -------------------------------------------
> Van Ooijen Technische Informatica: www.voti.nl
> consultancy, development, PICmicro products
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body