Has anyone experienced ICD comm problems on a fast processor (2.4GHz
P4) or while running Windows XP?

My homebuilt ICD works just fine on my older 133MHz Pentium running
Windows 98se but is totally unuseable on my new machine due to
constant comm failures. Downloading proceeds very slowly and can
rarely get past even the first couple of hundred bytes before a comm
failure occurs.

I've tried running at both 19,200 and 57,600 baud with the UART FIFO's
enabled and disabled with no apparent difference. I'm using the
5.70.40 version of MPLAB.

Any ideas or workarounds?


Thanks, Bob

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads