Thanks,

I just checked the Promate II and I was not able to create an=
 SQTP
file which writes to the EEPROM memory. The MPLAB wants to write
to the regular flash memory place. I do not want to do that=
 because
that will change the checksum.
All my programmers (PROMATEII, WARP-13) can write to the EEPROM=
 space
if I edit the EEPROM data manually, but I wanted to automate=
 that.
Mike, I checked PICALL, looks like it did not support ICSP and
PIC16F628A

Peter

On Sat, 31 May 2003 19:27:02 EDT, Mike105105@AOL.COM wrote:
>In a message dated 5/31/03 6:07:08 PM Eastern Daylight Time,
>Jan-erik.Soderholm@PAC.ERICSSON.SE writes:
>
>
>>Now, what non-Microchip programmers support this ?
>>(Or rather, what non-Microchip programming *software*
>>support this ?)
>>
>>Jan-Erik.
>
>Woohooo....finally something I am able to answer....
>PICALL is able to serialize.  You can either use the ID
>or SQTP.
>
>Mike
>
>--
>http://www.piclist.com hint: To leave the PICList
>mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu