I am attempting to get a PIC to run at 3.3 V.  Basically, I have the
standard blinking LED circuit, which works fine with a 5V regulator.  If
I swap the 5V regulator for a 3.3V regulator (getting 3.24 out), I get
nada.  The LED pin seems to be at about 1.7 V.  If I remove the LED, the
pin is at .06 V. =20
=20
Any ideas?  Is there anything special I need to do to run at 3V?
=20
Thanks!
=20
Alex

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics