At 11:42 AM 5/27/2003 -0500, Picdude wrote:

>- Wisp628 -- actually looked at this before posting my original message, but
>did not see any reference to Linux support.  If I was sure it would work
>under some Linux software, then this goes very high on the list.  I guess
>that a lot of programmers today are "spoken with" in a common fashion, but
>don't want to assume that it will work with just any SW.  John Nall claimed
>use under Linux..... John, what software are you using for this?

I'm using the Redhat 8.0 version of Linux.  I just use the Xwisp.py that
Wouter has available at his website.  Python is already installed under
Linux (RH8.0, anyway).  It is my recollection that I had absolutely no
problems whatsoever with getting  Xwisp.py and the Wisp628 to work under
Linux.  If it were not for MPLAB I would most likely do all PIC stuff with
Linux, since I like having multiple screens.  But I also like having a
simulator for the 18F452. :-)

John

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads