Bob Axtell wrote:

> I used this feature of the 876 to build long 24-bit calibration tables
> (two
> CONSECUTIVE words!  ) for a strain-gauge attached to a particular
> processor's PCB. Worked extremely well.

But if you've critical timing, it will jitter with 4 .. 8 msec !
So in most cases I'ld prefer external EEPROM.

> I found that when writing you had to issue a clrwdt just before
> beginning a
> write cycle. That stopped funny problems caused by a WDT reset.

So the WDT is running clearly during write ;-)

Stef

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.