Hi,

All you said is true. You got it right

*********** REPLY SEPARATOR  ***********

On 21/05/2003 at 14:11 Micro Eng wrote:

>OK...still playin with FET's, have a bunch on order to actually test with.
>P channel devices seem to be rated in negative current, why is that?  Just
>semantics because its Ids, where the current flows from source to drain?
>
>And the gate voltage, rated as a negative voltage.  If I look at the=
 specs,
>Vgs is say rated at -10V, is that implying that the gate will turn on if
>the
>voltage on the gate is 10 volts below that of the source pin?
>
>_________________________________________________________________
>Add photos to your e-mail with MSN 8. Get 2 months FREE*.
>http://join.msn.com/?page=3Dfeatures/featuredemail
>
>--
>http://www.piclist.com hint: To leave the PICList
>mailto:piclist-unsubscribe-request@mitvma.mit.edu


~~~~~~~~~~~oOo~~~~~~~~~~~
Ofer Safeman, M. Sc.
Senior Design Engineer

Paragon Communications
6 Pal-Yam
Haifa, 33095
ISRAEL
Phone: +972-4-8642775
Fax: +972-4-8642737
E-Mail: ofer@paragoncommtech.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu