Well... the 28-pin 16C55/57 are 0.6" wide. They are still available, but I doubt that much development work is being done with them these days. I don't know of any modern 28-pin DIP PICs in the wide package, though. Randy www.glitchbuster.com ----- Original Message ----- From: "Picdude" To: Sent: Friday, May 16, 2003 5:44 PM Subject: Re: [EE]: 3M Test Clip If you want one for narrow dips (0.3" spacing) like the 16F872, then I think the one you'll need is either the 923717-ND or 923742-28-ND (gold plated). These will also fit the 16F628 etc if you have enough room left on the ends. I don't believe there are any 28-pin wide (0.6" width) DIP PICs. The 28-pin 18F2320's etc are also 0.3" width I believe. .... someone correct me if I'm wrong here. Cheers, -Neil On Friday 16 May 2003 18:54, Brusque scribbled: > hello, > > I'm looking for a test clip (for ICSP 28 pin DIP PICs) and I've > found 3M test clips at Digikey. There's various models on the catalog > (page 262) but there's no pictures or clear explanations about the > differences between those itens. > > Please, someone can tell me what the differences are? > > Thank you very much, > > Brusque -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu