Thanks for the reply .....John ----- Original Message ----- From: "Kyrre Aalerud" To: Sent: Friday, May 09, 2003 4:21 AM Subject: Re: [EE]: LCD back light ?. > Most likely theese are for a EL type backlight. (Very thin backlight that > needs an inverter.) > If the clearing under the LCD is larger than 1mm they are for a LED type > backlight. > > KreAture > > ----- Original Message ----- > From: "moonshadow" > To: > Sent: Friday, May 09, 2003 9:04 PM > Subject: LCD back light ?. > > > I am using a 40 x 2 LCD on my development board and it has two solder pads > at one end. Are these for the LCD backlight ?. If so is it a DC or AC drive > and what voltages / currents are typical ?. Thanks a lot .... sorry it is > such a basic question ........ John > > -- > http://www.piclist.com hint: The PICList is archived three different > ways. See http://www.piclist.com/#archives for details. > > -- > http://www.piclist.com hint: The PICList is archived three different > ways. See http://www.piclist.com/#archives for details. -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body