Haven't been able to get an answer to this from the archives, google, or =
the=20
eagle forum, but hoping someone here can help...

How do I specify, in Gerber 274X format, the specification to which I nee=
d to=20
have a PCB milled?  (IE: the path that the router needs to take to cut th=
e=20
board).  I'm using Eagle, though I'll bet that this should be a Gerber=20
standard.

So far, I've drawn the outline (using arcs and lines) on the "milling" la=
yer=20
in Eagle, and can create an output file based on just this layer, which I=
 can=20
specify to the PCB-house as the milling path, but I'm sure this is no whe=
re=20
near standard practice.  Also, would this line need to be continuous?

Thanks,
-Neil.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads