Mike,

Let's assume that it does not increase the PCB and there is aleady
resistor of this type.

Tal

> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Mike Harrison
> Sent: Friday, May 02, 2003 9:09 AM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [PIC]:[EE]: What is the real cost of a single resistor ?
>
>
> I don't think there is an easy answer. So much depends on
> things like PCB size (does this resistor make the PCB
> bigger?) and number of parts already on the board, whether
> it's the same or different value as  parts already used
> elsewhere etc.  etc.
>
>
> On Fri, 2 May 2003 08:58:20 -0700, you wrote:
>
> >What is the actual cost of having a resistor on a PCB ?
> >
> >Is it true that pick-and-place operation of a single SMD
> resistor cost
> >few cents ?
> >
> >If possible, please calibrate your numbers to very high volume
> >manufacturing in the far east.
> >
> >Thanks,
> >
> >Tal
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.