The device is fed from a wall wort or car socket etc so it has to manage the charge it's self. Tim -----Original Message----- From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of M. Adam Davis Sent: Friday, May 02, 2003 3:14 PM To: PICLIST@MITVMA.MIT.EDU Subject: Re: [EE]: NmHi charger chip recommendation required It may not be worth it to build one yourself. If you go to your local hobby shop you'll find a wide variety of NiMH and NiCd chargers for RC car use. The one I purchased has ten custom settings (for ten different packs), will fast charge up to 6A, and handle packs up to 12V. It uses a small character LCD and three buttons to handle all settings. It tells you when it's done charging, how much current the pack accepted before finishing, and the current voltage of the pack. It also tells you if the pack is shorted or reverse polarity. I got it for ~$50, which isn't as cheaply as I could have made one, but it certianly has more features than I would spend the time to put into one, and the fact that I can define 10 different packs means I can simply plug in any of my packs and start charging with a few button presses, rather than re-configuring the thing. There are cheaper ones available as well. -Adam Tim Box wrote: >Hi All > >Can any body recommend a battery charger chip to charge 4 AA NmHi 2000ma >batteries (4.8v total)? > >I can feed it any voltage required 3 to 12 volts and if necessary it can be >current limited (rather not though as no room for a heat sink). > >I would like it to have an output to indicate charging, full and top/up. It >would be nice to also have a signal if no or duff battery > >Lastly not to expensive and not to many ancillary components > > >Many many thanks > >Tim > >-- >http://www.piclist.com hint: PICList Posts must start with ONE topic: >[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > > > > -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads