RB6 and RB7 both work on the manual test, and are connected to pins 27 an=
d 28=20
respectively (on the 16F872).  PGM is now forced to ground (pin 24), both=
 VSS=20
pins are grounded.  Vdd and MCLR are connect as appropriate.

Cheers,
-Neil.


On Wednesday 30 April 2003 19:03, Ned Konz scribbled:
> On Wednesday 30 April 2003 03:17 pm, Picdude wrote:
> > ...
> > But alas, same prob.... says pic is protected and needs to be.
> > Erasing does not help any.
>
> Nothing connected to the programming pins RB6/RB7?

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body